Monarch Master Metered 20 Litre Water Softener

Monarch Master Metered 20 Litre Water Softener
Midi Monarch Ultimate Water Softener
Free 15mm Installation Kit Included
Suitable for Gravity Systems
The highest flow rates of any softener available - up to 83 litres per minute  Slide on rear cover that needs no additional head room to remove it, as compared to conventional 'lift off' lids                    

Specifications

Solvent free Resin: 20 litres
Salt use per regeneration: 1.6 - 3.0kg
Flow Rates - lpm* Standard kit/ Maxflow-PSK: 25/78 lpm
Dimensions HxWxD: 735x275x470

Product Features
 
  • Easy push button set up - only takes a few seconds
  • Unique Self Protect Programme that:
  • Detects leaks in your plumbing system
  • Delays regeneration until 2am
  • Stores data in the event of a power cut
  • Initiates an additional regeneration if ever required
  • Learns and remembers your water usage patterns to make substantial savings on both salt and water use
  • Up to 57% salt saving over conventional softeners
  • Food Grade Resin
  • CE Approved
  • Suitable for 15, 22 and 28mm water supplies

 

Safe low voltage electronics via plug-in transformer - supplied 
Meter Control with proportional brining as standard - only regenerates the resin that has been used
 
 
Choosing Your Model
 
Model Selection Guide:
 
Family Size Models
 
 
Hard Water*
Very Hard Water**
1-3
MiniAqua or Midi
MiniAqua or Midi
4-5
MiniAqua or Midi
Midi
6-7
Midi
Master
 
 
*Hard Water = up to 350ppm. **Very Hard Water = between 360-450ppm
Family size is based on allowing 160 litres per person per day (35 gallons)
 
Models
Litres of Solvent Free Resin
Salt Use per Regeneration (kg)
Flow Rates - lpm*
Standard kit/ Maxflow-PSK
Dimensions
(mm)
MiniAqua
11
0.9 - 1.6
25/83
515x275x460
Midi
15
1.0 - 1.9
25/78
585x275x460
Master
20
1.6 - 3.0
25/78
735x275x460
 
 
*pressure drops: 25-lpm/0.2bar, 35-lpm/0.3bar, 50-lpm/0.6bar and 70-lpm/1.2bar,
If using either Maxiflow hoses or the PSK please allow an extra 10mm to depth.
If using on 28mm system please allow an extra 35mm depth.
Installation Requirements (all models)
Water pressure: 20-70 psi. Operating temperature: 2-49°C. Electrical supply: 3-pin socket. Drain facility.
 
 

Why have a water Softener

  • Removes existing scale
    Your water softener will begin to descale your system from the moment it is installed.
  • Prevents any new scale
    Once your existing scale has been removed, new scale will not form. Baths, basins, taps, shower screens, crockery, cutlery and glasses will stay clean.
  • Protects your appliances
    With no scale in your system, your washing machine, dishwasher and shower will work as never before. Boilers and hot water cylinders will last much longer.
  • Kinder to your skin
    Soft water feels silkier. Many sufferers of dry skin notice a marked improvement with soft water. With lower amounts of soaps, washing powders etc, being required, gone are the major causes of dryness and irritation.
  • Saves you money
    The cost of washing powders, soaps, shampoos, cleaning agents and detergents will be reduced by up to 50% and with no scale to heat first, it truly proves that soft water saves you money.
  • Bath time bliss
    Continuous lather, no scum, no ‘tide’ lines, sounds good doesn’t it? p.s. Less cleaning time too, all from a water softener from one of the U.K,s leading water softener manufacturers.
 

 

Write a review

Please login or register to review
  • Brand: Monarch Water
  • Product Code: MASTER
  • Availability: In Stock
  • £577.90

Tags: monarch master metered 20 litre water softener, master, monarch water, eelectric, monarch softeners, 5 or more people